Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Cs from the Fukushima Daiichi Nuclear Power Plant accident; Simulations based on identical input dataSato, Yosuke*; Takigawa, Masayuki*; Sekiyama, Tsuyoshi*; Kajino, Mizuo*; Terada, Hiroaki; Nagai, Haruyasu; Kondo, Hiroaki*; Uchida, Junya*; Goto, Daisuke*; Qu
lo, D.*; et al.
Journal of Geophysical Research; Atmospheres, 123(20), p.11748 - 11765, 2018/10
Times Cited Count：40 Percentile：84.89(Meteorology & Atmospheric Sciences)A model intercomparison of the atmospheric dispersion of Cs emitted following the Fukushima Daiichi Nuclear Power Plant accident was conducted by 12 models to understand the behavior of Cs in the atmosphere. The same meteorological data, horizontal grid resolution, and an emission inventory were applied to all the models to focus on the model variability originating from the processes included in each model. The multi-model ensemble captured 40% of the observed Cs events, and the figure-of-merit in space for the total deposition of Cs exceeded 80. Our analyses indicated that the meteorological data were most critical for reproducing the Cs events. The results also revealed that the differences among the models were originated from the deposition and diffusion processes when the meteorological field was simulated well. However, the models with strong diffusion tended to overestimate the Cs concentrations.
Ueta, Shohei; Aihara, Jun; Mizuta, Naoki; Goto, Minoru; Fukaya, Yuji; Tachibana, Yukio; Okamoto, Koji*
Proceedings of 9th International Topical Meeting on High Temperature Reactor Technology (HTR 2018) (USB Flash Drive), 7 Pages, 2018/10
The security and safety fuel (3S-TRISO fuel) employs the coated fuel particle with a fuel kernel made of plutonium dioxide (PuO
) and yttria stabilized zirconia (YSZ) as an inert matrix. Especially, a zirconium carbide (ZrC) coating is one of key technologies of the 3S-TRISO, which performs as an oxygen getter to reduce the fuel failure due to internal pressure during the irradiation. R&Ds on ZrC coating directly on the dummy CeO-YSZ kernel have been carried in the Japanese fiscal year 2017. As results of ZrC coating tests by the bromide chemical vapor deposition process, stoichiometric ZrC coatings with 3 - 18 microns of thicknesses were obtained with 0.1 kg of particle loading weight.
Asakura, Toshihide; Kim, S.-Y.; Morita, Yasuji; Ozawa, Masaki*
Journal of Nuclear and Radiochemical Sciences, 6(3), p.267 - 269, 2005/12
An electrolytic extraction (EE) method, i.e. electro-reductive deposition, of Tc from nitric acid aqueous solution was studied for future reprocessing. After 30 min of constant potential electrolysis by carbon electrode at -0.3 V vs. SSE (Standard Silver Electrode), Tc concentration in 3 M nitric acid decreased to 93 % of the initial value, which corresponds to 7 % of deposition. With co-existence of Pd, the value reached to 15 % of deposition equivalent by electrolysis at 
0.0 V vs. SSE for 60 min. An acceleration effect of Pd on Tc deposition (promoter effect) was suggested. The concentration, however, increased to the initial value after further electrolysis and competing re-dissolution of deposited Tc was also suggested. In cyclic voltammetry measurements, it was found that the deposit from Tc-Pd-Ru-Rh solution dissolved easier than that from Pd-Ru-Rh did. In electrolyzed Tc solution, an absorption peak at 482 nm was found. It can be attributed to the complex with nitrite anion, and the complex formation is proposed as one possible mechanism of Tc re-dissolution.
Teraoka, Yuden
Nano Tekunoroji Daijiten, p.340 - 351, 2003/12
The current status of microprocesses using synchrotron radiation in Japan was reviewed. The SR-excited process is followed by SR-excited surface modification, SR-excited crystal growth and SR-excited etching. The SR-excited surface modification is followed by SR-gas-excited surface modification and SR-direct-excited surface modification. The SR-excited crystal growth is followed by SR-excited atomic layer epitaxy and SR-excited chemical vapor deposition. THe SR-excited etching is followed by SR-direct-excited etching, SR-gas-excited etching and SR ablation.
